Do you want the seem of slate tile but Never Assume you might be up to tackling the installation and will't pay for knowledgeable to accomplish The work? Or maybe the price of stone or slate just just isn't in the price range - very well, maybe this trick is to suit your needs.
There are several vinyl peel and stick tiles around that are pretty good quality and glimpse really nice.
In one corner of our kitchen We have now a Forged-iron freestanding gas log stove. It is flanked by rocking chairs and helps make a good cozy sitting down region. Whenever we mounted the stove we put it up over a lifted six-inch platform fabricated from plywood to lift it up higher. The wall in that corner slopes from 8 feet approximately about twelve toes and we believed it might glance very nice to put both slate tile or pure stone in the corner bordering the stove.
The expense of the natural stone was prohibitive for us and whilst checking out the slate tiles in the future we handed via the vinyl tile section and saw a colour we really favored which was "imitation slate". The tile was weighty and experienced a good experience. A lightweight bulb went on in my head. My partner was not so sure at the beginning...he was frightened it might seem identical to vinyl tile stuck towards the wall. But with some convincing he eventually agreed after we realized if it didn't search correct soon after we used a handful of tiles we could return The remainder and we might only be out a handful of pounds. So away we went by using a couple of containers of vinyl tile.
We very quickly have been in the position to set the tile into put on the wall with no pre-preparation Because the wall was only painted and was clear. There was hardly any slicing included which was carried out using a razor knife. We also tiled the elevated platform under the stove.
It didn't acquire extensive - only two or three evenings of Listening to the tiles tumble - to determine the adhesive to the back again with the tiles was not sufficient to keep the tile over the wall, Specifically around a stove exactly where the temperature was consistently heading from scorching to chilly. This also offered a fire hazard as several of the tiles fell onto the stove. So we purchased Gorilla Glue (Liquid Nails would also do the job) and re-secured the tiles to your wall. That worked and they stayed up following that. Since our kitchen area is a piece in development, once we finally get our kitchen area completed and add the trimwork and moulding we will probably trim this area out with matching moulding.
The end result was a lovely backdrop to my fireplace. Each and every time a visitor will come into my kitchen they first admire it then wander in excess of and touch the tiles and ask what it can be...they never ever guess it's vinyl tile until I explain to them. You just wish to be watchful within your selection of tile And do not select some thing shiny that is obviously vinyl unless vinyl could be the look you are attempting to realize!
You always wish to be thorough about what you put in herringbone tiles close to any sort of heat resource And the way shut you install it. Normally be sure it is securely connected to ensure that it can not occur free and fall and existing a fire hazard or drop and strike somebody and damage them! When utilizing any type of glue Make sure you Stick to the maker's Directions and retain the realm very well ventilated. It's also a smart idea to change off any pilot lights and ensure there are no open up flames present.
I'd also check out this kind of tile on the skin regions of a traditional fireplace to freshen it up or for kitchen area backsplash locations. I'm contemplating incorporating exactly the same tile for a backsplash in my kitchen to carry those two regions of my kitchen area together.